Belcoin LUCKY 5 JOKER, Руководство пользователя

Страница: 8 / 21

Lucky5Joker www.belcoin.be
971001UK
- 8 -
info@belcoin.be
TEST ROUTINES
GAMETEST
When the backdoor is opened, the machine will restart and give 100BFR on the credit
display.
TEST PROCEDURE
Test is entered via switch 1 on bank 1 of main board when it is switched to the other
position. Now the display shows which test is selected. By pressing the stick button you
go to the next test. The test is entered by pressing the start button. Press the stick
button again to exit a test.
.
TEST 1: VOLUME SETUP
This test allows you to setup the volume level of the machine. If the start button is
pressed, a repeated tune will sound. By pressing hand 1 button the volume will be
decreased. By pressing the hand 2 button the volume will be increased.
TEST 2:
LAMP TEST
This test allows you to test each lamp separately or by groups. AII the lamps are
connected in a so called "diode matrix" with 8 sources (0 to 7) and 16 sinks (0 to 15). If
the start button is pressed, the display will show: SOURCE 00 SINK 00.
Pressing hand button 1 changes the source line (0 tlm 7).
Pressing hand button 2 lights an entire source line.
Pressing hand button 3 changes the sink line (0
tlm 15)
Pressing hand button 4 topglass I buttons light up
Pressing hand button 5 each lamp lights up in a logicalorder.
Pressing the change button will light up all the lamps behind the glass.
If pressed again ,all the button lamps will light up.
Pressing the ticket button will activate the logical lamp step mode.
A list of all the lamps with their source I sink combinations is included in the back of this
manual.
TEST 3:
LED TEST
If the start button is pressed, all led segments will flash on and off.
If the stick button is pressed, each led unit is tested individually.
If the stick button is pressed again, each segment is tested individually.