background image

 4

 

 

SAFETY SIGNAL WORDS

 

 

 

TAKE NOTE!  THIS SAFETY ALERT SYMBOL FOUND THROUGHOUT THIS MANUAL IS 

USED TO CALL YOUR ATTENTION TO INSTRUCTIONS INVOLVING YOUR PERSONAL 

SAFETY AND THE SAFETY OF OTHERS.  FAILURE TO FOLLOW THESE INSTRUC-

TIONS CAN RESULT IN INJURY OR DEATH.

 

 

 

 

 

 

 

 

THIS SYMBOL MEANS

 

 

ATTENTION!

 

BECOME ALERT!

 

YOUR SAFETY IS INVOLVED!

 

 

 

 

 

 

Safety of the operator is one of the main concerns in designing and developing a new piece of equip-

ment.  Designers and manufacturers build in as many safety features as possible.  However, every year 

many accidents occur which could have been avoided by a few seconds of thought and a more careful 

approach to handling equipment.  You, the operator, can avoid many accidents by observing the fol-

lowing precautions in this section.  To avoid personal injury, study the following precautions and insist 

those working with you, or for you, follow them.

 

 

Replace any CAUTION, WARNING, DANGER or instruction safety decal that is not readable or is 

missing.  Location of such decals are indicated in this booklet.

 

 

Do not attempt to operate this equipment under the influence of drugs or alcohol.

 

 

 

 

GENERAL SAFETY GUIDELINES

 

 

Note the use of the signal words DANGER, WARNING and CAUTION with the safety messages.  

The appropriate signal word for each has been selected using the following guidelines:

 

 

DANGER:

  Indicates an imminently hazardous situation that, if not avoided, will result in death 

or serious injury.  This signal word is to be limited to the most extreme situations typically for ma-

chine components which, for functional purposes, cannot be guarded.

 

 

WARNING:

  Indicates a potentially hazardous situation that, if not avoided, could result in death 

or serious injury, and includes hazards that are exposed when guards are removed.  It may also be 

used to alert against unsafe practices.

 

 

 

CAUTION:

  Indicates a potentially hazardous situation that, if not avoided, may result in minor 

or moderate injury.  It may also be used to alert against unsafe practices.

 

 

 

 

 

 

 

 

Содержание Tar River DRL-048
























Отзывы: