Belco Multi-Biometric, Быстрый старт

Страница: 18 / 18

16
Notice the following setting interfaces are available.
IP address:
Default IP is 192.168.1.201. You can modify it. But do NOT use an IP address already being used
by another network device.
Subnet Mask:
Default mask is 255.255.255.0. You can modify it.
Gateway:
Default gateway address is 0.0.0.0. You can modify it.
RS232: If using RS232 communication, select “On”.
RS485: If using RS485 communication, select “On”.
Tips: RS232/485 only 2 to 1
Baud rate : This parameter is used to set the baud rate for the communication between the device
and the PC. It includes five options: 9600, 19200, 38400, 57600, and 115200.
Device ID: This parameter is used to set the ID of device from 1 to 254. If the RS232/RS485
communication is adopted, you need to enter the device ID on the software communication
interface.
Comm. Key: you can set a password for the connection between the device and PC. The default
password is 0, and 1 to 6 digits passwords are supported.