Belco Security DA3000, Руководство пользователя

Страница: 1 / 2

DA3000 Standalone Touch Access Controller
User Manual
v2.0
1. Specifications:
1.1 Technical parameters
：
NO Item Value
1
Operating voltage DC 12V±10%
2
Operating current < 100mA
3
Dimensions 120mm×78mm×22mm
4
Weight 110g
5
Ambient temperature 0
℃—
60
℃
6
Relative humidity 20%—80%
7
Storage 1000 users
8
Card type RFID (Mifare optional)
9
Card reading distance 1
－
10CM
1.2 Factory Default
：
1.3 Light and Sound indicates:
Light: red and green
Light Description Access control status
Red light flash every 1 sec
（
Slow flash
）
Holding state
Red light is always ON Programming state
Green light is always ON within Open time Unlocking state
Green light flash every 0.5sec (Fast flash) Pending further action
Sound
：
buzz
Description Indicates
1 short buzz Valid input
3 short buzz Invalid input
1 long buzz Program success
Continuous long buzz Restoring factory programming passwords
2. Installation Guide:
JP1 terminal
：
JP2 terminal
：
NO Mark Color Function Remark
1 +12V Red Power+
Optional
2 GND Black Power-
3 DATA0 Green WG DATA0
4 DATA1 White WG DATA1
5 NC Brown Relay NC output
6 COM Blue Relay Com output
7 NO Purple Relay NO output
NO Mark Color Function
1 +12V Red Power+
2 GND Black Power-
3 PUSH Blue Low level output
4 OPEN Yellow Door Release
5 BELL Grey Bell
6 BELL White Bell
Programming
Password
123456
Common Access
Password
None
Backlight Auto
Relay Unlock
output
5 Seconds
W26 port Input Security mode OFF
Open mode
Card or Access Password
Access Password include Private Access Password (PIN) and
Common Access Password