belavi 22466-22, Руководство пользователя

Страница: 5 / 21

8 9
Assembly Instructions
STEP 1:
Bring Right Panel (A), and Left Panel (B) together as instructed in the
illustration above. Please note the correct placement of parts A and
B during assembly. Insert Corner Connector (G) into the top openings
of parts A and B. When parts A and B are assembled correctly, part G will
face inwards, see illustration above.
Insert one M6x30mm Bolt (Q) through the eyelet at the top of Right
Panel (A), through Corner Connector (G), and into the bolt-threading
insert found on the side of Left Panel (B), see Fig. 1.
Insert one M6x30mm Bolt (Q) through the eyelets found at the center
and bottom of Right Panel (A), and into the bolt-threading inserts
found on the side of Left Panel (B). Follow these steps to assemble the
remaining A’s, B’s, and G’s as instructed here.
G
G
A
Q
A
G
A
B
Part A should always be
on the right side.
Part B should always be
on the left side.
When Part A and B are
in the correct order,
Part G will face inward.
Facing a corner
outside of your gazebo.
Fig. 1
Q
(12) Bolt
(M6x30 mm)
Assembly Instructions
STEP 2:
Insert two M6x30mm Bolts (Q) through eyelets that are furthest apart at one
end of Crossbeam (E), and into the bolt-threading inserts found at the top of
Right Panel (A), see Fig. 2.
Insert two M6x30mm Bolts (Q) through eyelets of Crossbeam (E), and into the
bolt-threading inserts found at the top of Left Panel (B). Follow these steps to
connect remaining E’s to the tops of A’s and B’s.
Insert three M6x14mm Bolts (P) through eyelets of Crossbeam Connector (F),
and into the bolt-threading inserts found at the opposite ends
of Crossbeams (E), connecting these parts to one another.
Please note that one eyelet in the center of Crossbeam
Connector (F) will remain unused at this stage of assembly,
see Fig. 3. Follow these steps to connect all Crossbeams (E) to
one another forming a square frame as illustrated above.
Use the brackets found on either side of Corner Shelves (M)
to secure these parts in between Left Panels (B) and Right
Panels (A), see Fig. 4. Tighten all bolts left loose during
assembly process.
Fig. 2
Fig. 3
Fig. 4
Q
(16) Bolt
(M6x30 mm)
P
(12) Bolt
(M6x14 mm)
M
Fig. 3
Fig. 4
Fig. 2
*Do not tighten bolts down completely during this portion of assembly.
E
E
P
F
Q
A
E
Q
Q
E
B
Q
For
Reference
Only