June 30, 2006
Confidential
Document Number BDTM10001-A05 Standard
BelAir100 User Guide
Common Radio Module Configuration Commands
The
set arm <n> mode
command applies only to radios with part numbers
B2CC000AA, B2CC000AB, B2CC011AA, B2CC011AA, B2CC043AA. If
switched on, the access radio must be configured as an Access Point. If set to
disable
, the access radio is switched off.
Antenna Type
show {arm<n>|brm<n>} antenna-type
set {arm<n>|brm<n>} antenna-type <type>
These commands are only available if your unit contains a radio with part
numbers B2CC011AA, B2CC011AB, B2CC043AA or B2CC033AA. Use the
/system/show phyinv
command to display the radio’s part number.
These commands let you manage the type of antenna installed with your unit.
Each antenna type has an associated antenna gain.
For the
show
command, the output displays the current and possible antenna
types, the associated antenna gain (in dBi) for each type and the maximum
allowable transmit power for that antenna. The displayed values vary depending
on the country of operation.
For the
set
command, you must set the antenna type to match the gain of the
antenna installed in your unit. Use the
show
command to determine valid
values for <type>. For all countries except Korea, the default access antenna
type is for an antenna gain of 8 dBi. For Korea, the default access antenna type
is for an antenna gain of 6 dBi.
CAUTION!
Improper setting of the antenna type may exceed regulatory requirements and
void the operator’s right to operate the radio equipment.
Example
/# cd radio
/radio# show arm1 antenna-type
Antenna : External
Antenna Type : 0
Antenna Gain : 0.00dBi
TYPE GAIN State
---- ---- -----
1 4.00 --
2 7.00 --
3 9.00 --
4 10.00 --
5 10.25 --
6 10.50 --
7 12.00 --
8 13.50 --
9 15.00 --
10 23.00 --