3
INSTALLATION INSTRUCTION
Asia-Pacific
+86 755 298 85888
Europe, Middle East
+353 61 225 977
North America
+1
408
785 5200
© 2020 Bel Power Solutions & Protection
BCM.00466_AD
FIG.1 - CONNECTIONS
FIG.2 - DIMENSIONS
FIG.3 - DISTANCES
Just for reference
(1)
AC/DC input
(2)
DC output (load)
(3)
Battery connection
(4)
Diagnostic Output dry contact
NC load supplied by Power S.
NO load supplied by Battery
(5)
Green LED: Output on Power S.
(6)
Red LED: output on Battery
(7)
Output voltage adjustment
Input AC Line:
▪
L = Line
▪
N = Neutral
▪
= Earth ground
Input DC Line:
▪
L = + Positive DC
▪
N = - Negative DC
▪
= Earth ground
Output:
▪
LOAD + = Positive DC
▪
LOAD - = Negative DC
▪
BATT + = Positive DC Battery
▪
BATT - = Negative DC Battery
▪
Dry contact = NC
▪
Dry contact = NO
Dimension
W
D
H
mm (inc)
54.0 (2.16)
110.0 (4.33)
115.0 (4.52)
Distance
A
B
mm (inc)
20 (0.8)
50 (2.0)
FIG.4 - MOUNTING / DISMOUNTING INSTRUCTIONS
For DIN rail fastening according to IEC 60715 TH35-7.5(-15)
Mounting as shown in figure, with input terminals on lower side, with suitable cooling and maintaining a proper distance between adjacent devices as specified in the
Installation Instruction of each family.
MOUNTING:
1.
Tilt the unit slightly backwards.
2.
Fit the unit over the top edge of the rail.
3.
Slide it downward until it hits the stop.
4.
Press against the bottom for locking.
1
2
3
4
FIG.5 - RECOMMENDED CONNECTING CABLE
Recommended Tightening torque
0.5 - 0.6 Nm
4.42 - 5.30 lbf in
Solid: 2.5 mm² / 12 AWG
Stranded:1.5 mm² / 12 AWG
L: 6.0 - 7.5 mm / 0.24 - 0.30 in
