Washing Machine / User’s Manual
53 / EN
4.3.15 Changing the selections after programme has started
Switching the machine to pause mode
Press the Start/Pause to switch the machine to pause mode while a programme is running. The
light of the current programme will flash on the Programme Follow-up indicator, indicating that the
machine has switched to pause mode.
Also, when the loading door is ready to be opened, the Loading Door light will turn off in addition to
the programme step light.
Changing the auxiliary function, speed and temperature
Depending on the step the programme has reached, you can cancel or select auxiliary functions. See
“Auxiliary function selection”.
You can also change the speed and temperature settings. See "Spin speed selection" and
"Temperature selection".
C
INFORMATION
• If no change is allowed, the relevant light will flash 3 times.
Adding and removing laundry
1. Press the “Start/Pause” button to pause the machine. The programme follow-up light of
the relevant step during which the machine was switched into the pause mode will flash.
2. Wait until the Loading Door can be opened.
3. Open the loading door and add or take out laundry.
4. Close the loading door.
5. Make changes in auxiliary functions, temperature and speed settings if necessary.
6. Press the “Start/Pause” button to start the machine.
4.3.16 Cancelling the programme
To cancel the programme, turn the Programme Selection knob to select another
programme. Previous programme will be cancelled. End/Cancel light will flash continuously
to notify that the programme has been cancelled.
When you turn the Programme Selection knob, the machine will end the programme but
will not discharge the water inside. When you select and start a new programme, the
newly selected programme will start depending on the step the previous programme was
cancelled in. For example, the machine may take in additional water or continue to wash
with the water inside.
C
INFORMATION
• Depending on the step where the programme was cancelled in, you may have to add
detergent and softener again for the programme you have selected anew.
4.3.17 End of programme
At the end of the programme, “End” will be displayed.
1. Wait until the light of the loading door goes off completely.
2. Switch the programme selection knob to On/Off to switch off the machine.
3. Take out your laundry and close the loading door. Your machine is now ready for the next washing
cycle.
4.3.18 Your machine has the "Pause Mode" function.
After using the On/Off button to switch on the machine, if you do not start any
programme in the selection step or do not perform anything else, or if you do not do
anything in 10 minutes after the selected programme has ended, the machine will
automatically switch to energy saving mode. Also, if your product has a display that
shows programme time, this display will completely turn off. If you turn the Programme
Selection knob or touch any button, the lights and the display will switch back to the
previous position. The selections you make when exiting the energy efficiency mode may
change. Check if your selections are correct before starting the programme. If necessary,
make adjustments again. This is not an error.