30 / EN
Washing Machine / User Manual
3. Open the Loading Door and add or take out the laundry.
4. Close the Loading Door.
5. Make changes in speed settings, if necessary.
6. Press Start / Pause button to start the machine.
4.6.15 Cancelling the programme
To cancel the programme, turn the Programme Selection knob to select another
programme. Previous programme will be cancelled. End / Cancel light will flash
continuously to notify that the programme has been cancelled.
Your machine will end the programme when you turn the Programme Selection knob;
however, it does not drain the water inside. When you select and start a new programme,
the newly selected programme will start depending on the step the previous programme
was cancelled in. For example, it may take in additional water or continue to wash with the
water inside.
C
Some programmes may start by discharging the water inside the machine. Depending on the
step where the programme was cancelled in, you may have to put detergent and softener
again for the programme you have selected anew.
4.6.16 End of programme
When the programme ends, "End" LED becomes on at the Programme Follow-up indicator.
1. Wait until the "Door Lock Enabled LED" goes off completely.
2. To switch off the machine, turn the Programme Selection Knob to On/Off position.
3. Take out your laundry and close the loading door. Your machine is ready for the next
washing cycle.
4.6.17 Your machine features "Pause Mode".
After you switch on your machine with the programme selection button (by switching the
button to a different position than the On/Off position), if no programme is started or no
other procedure is performed in the selection step or no action is taken within approx. 2
minutes after the selected programme ends, your machine will switch to energy saving
mode automatically. The brightness of the indicator lights will decrease. Also, if your
product has a display that shows programme time, this display will be completely turned
off. If you turn the Programme Selection knob or touch any button, lights and display will
switch back to previous condition. The selections which you make when exiting from the
energy efficiency may change. Please check the correctness of your selections before
starting the programme. If necessary, please make your settings again. This is not an error.
Содержание WTK62041W
Страница 1: ...Washing Machine User Manual WTK62041W 2820528408_EN 30 03 20 14 19 Document Number ...
Страница 39: ......
Страница 44: ......