Problem
Reason
Solution
Too much foam forms in the
machine. (**)
Improper detergents for the washing machine are
being used.
•
Use detergents appropriate for the washing
machine.
Excessive amount of detergent is used.
•
Use only sufficient amount of detergent.
Detergent was stored under improper conditions.
•
Store detergent in a closed and dry location.
Do not store in excessively hot places.
Some meshed laundry such as tulle may foam too
much because of their texture.
•
Use smaller amounts of detergent for this
type of item.
Detergent is put in the wrong compartment.
•
Put the detergent in the correct
compartment.
Softener is being taken early.
•
There may be problem in the valves or in the
detergent dispenser. Call the Authorized
Service Agent.
Foam is overflowing from the
detergent drawer.
Too much detergent is used.
•
Mix 1 tablespoonful softener and ½ l water
and pour into the main wash compartment of
the detergent drawer.
•
Put detergent into the machine suitable
for the programmes and maximum
loads indicated in the “Programme and
consumption table”. When you use additional
chemicals (stain removers, bleachs and etc),
reduce the amount of detergent.
Laundry remains wet at the end
of the programme. (*)
Excessive foam might have occurred and
automatic foam absorption system might have
been activated due to too much detergent usage.
•
Use recommended amount of detergent.
(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the
machine and to its surrounding environment. Laundry should be rearranged and re-spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.4.2
A
CAUTION:
If you cannot eliminate the problem although you follow the instructions in this section, consult your
dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.
30
/ EN
Washing Machine / User’s Manual
