Beko WMB 71444 HPTLA, Руководство пользователя

Страница: 30 / 74

30 / EN
Washing Machine / User’s Manual
flashes. Decrease the delayed start time by pressing the
Delayed Start - button. Programme duration appears after
30 minutes. Press Start / Pause / Cancel button to start the
programme.
4.13 Starting the programme
Press Start / Pause / Cancel button to start the programme.
Start symbol showing the startup of the programme will turn
on. Loading door is locked and Door Locked symbol appears
on the display. The symbol of the step from which the
programme has started appears on the display (Prewash,
Main Wash, Rinse, Softener and Spin).
4.14 Progress of programme
Progress of a running programme is indicated on the display
with a set of symbols.
Relevant symbol appears on the display at the beginning of
each programme step and all symbols remain lit at the end
of the programme. The farthermost right symbol indicates
the current programme step.
Prewash
If the Prewash auxiliary function is selected, Prewash symbol
appears on the display indicating that the prewash step has
started.
Main Wash
Main Wash symbol indicating that the main wash step has
started appears on the display.
Rinse
Rinse symbol indicating that the rinsing step has started
appears on the display.
Softener
Softener symbol indicating that the softener step has started
appears on the display.
Spin
Appears at the beginning of the final spin step and remains
lit during Spin and Pump special programmes.
C
If the machine does not pass to the spinning step,
Rinse Hold function might be active or the automatic
unbalanced load detection system might be activated
due to the unbalanced distribution of the laundry in the
machine.
4.15 Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases when
the water level is unsuitable.
Door Locked symbol appears when the loading door is
locked. This symbol will flash until the loading door becomes
ready to open when programme completes or the machine
is paused. Do not force to open the loading door in this step.
Symbol disappears when the door is ready to open. You can
open the door when the symbol disappears.
4.16 Changing the selections after
programme has started
Switching the machine to pause mode
Press the Start / Pause / Cancel button to switch the
machine to pause mode. Pause symbol appears on the
display indicating that the machine is paused. Start symbol
disappears.
Changing the speed and temperature settings for
auxiliary functions
Depending on the step the programme has reached, you
may cancel or activate the auxiliary functions; see, "Auxiliary
function selection".
You may also change the speed and temperature settings;
see, "Spin speed selection" and "Temperature selection".
Adding or taking out laundry
Press the Start / Pause / Cancel button to switch the
machine to pause mode. The programme follow-up light of
the relevant step during which the machine was switched
into the pause mode will flash. Wait until the Loading Door
can be opened. Open the Loading Door and add or take
out the laundry. Close the Loading Door. Make changes
in auxiliary functions, temperature and speed settings if
necessary. Press Start / Pause / Cancel button to start the
machine.
C
The loading door will not open if the water temperature
in the machine is high or the water level is above the
door opening.
4.17 Child Lock
Use Child Lock function to prevent children from tampering
with the machine. Thus you can avoid any changes in a
running programme.
C
You can switch on and off the machine with On / Off
button when the Child Lock is active. When you switch
on the machine again, programme will resume from
where it has stopped.
To activate the Child Lock:
Press and hold 2
nd
and 4
th
Auxiliary Function buttons for 3
seconds. “Con” appears on the display.
C
Same phrase will appear on the display if you press
any button when Child Lock is enabled.
To deactivate the Child Lock:
Press and hold 2
nd
and 4
th
Auxiliary Function buttons for 3
seconds. “COFF” appears on the display.
C
Do not forget to disable the child lock at the end of
the programme if it was enabled before. Otherwise,
machine will not allow to select a new programme.
4.18 Cancelling the programme
Press and hold Start / Pause / Cancel button for 3 seconds.
Start symbol flashes. Symbol of the step at which the
programme was cancelled remains lit. "End" appears on the
display and the programme is cancelled.
C
If you want to open the loading door after you have
cancelled the programme but it is not possible to open
the loading door since the water level in the machine
is above the loading door opening, then turn the
Programme Selection knob to Pump+Spin programme
and discharge the water in the machine.
4.19 Machine is in Rinse Hold mode
Spin symbol flashes and Pause symbol illuminates when the
machine is in Rinse Hold mode.
If you want to spin your laundry when the machine is in this
mode:
Adjust the spin speed and press Start / Pause / Cancel
button. Pause symbol disappears and Start symbol appears.
Programme resumes, discharges the water and spins the
laundry.