Beko WMB 71231B, Руководство пользователя

Страница: 29 / 40

Washing Machine / User‘s Manual
29 / EN
Operating the product
has been switched to the pause mode.
Also, when the loading door is ready to be
opened, Loading Door light will also illuminate
continuously in addition to the programme step
light.
Changing the speed and temperature
settings for auxiliary functions
Depending on the step the programme has
reached, you may cancel or activate the
auxiliary functions; see, "Auxiliary function
selection".
You may also change the speed and
temperature settings; see, "Spin speed
selection" and "Temperature selection".
C
If no change is allowed, the relevant
light will flash for 3 times.
Adding or taking out laundry
1. Press the Start / Pause button to switch the
machine to pause mode. The programme
follow-up light of the relevant step during
which the machine was switched into the
pause mode will flash.
2. Wait until the Loading Door can be opened.
3. Open the Loading Door and add or take out
the laundry.
4. Close the Loading Door.
5. Make changes in auxiliary functions,
temperature and speed settings if necessary.
6. Press Start / Pause button to start the
machine.
5.16 Canceling the programme
To cancel the programme, turn the Programme
Selection knob to select another programme.
Previous programme will be canceled. End /
Cancel light will flash continuously to notify
that the programme has been canceled.
Pump function is activated for 1-2 minutes
regardless of the programme step, and
whether there is water in the machine or not.
After this period, your machine will be ready to
start with the first step of the new programme.
C
Depending on the step where the
programme was canceled in, you may
have to put detergent and softener
again for the programme you have
selected anew.
5.17 End of programme
“End” appears on the display at the end of the
programme.
1. Wait until the loading door light illuminates
steadily.
2. Press On / Off button to switch off the
machine.
3. Take out your laundry and close the loading
door. Your machine is ready for the next
washing cycle.
5.18 Your machine is equipped with
a “Standby Mode”
In case of not starting any programme or
waiting without making any other operation
when the machine is turned on by On/Off
button and while it is in selection step or if no
other operation is performed approximately
2 minutes after the programme you selected
has come to an end, your machine will
automatically switch to energy saving mode.
Brightness of indicator lights will decrease.
Also, if your product is equipped with a display
showing the programme duration, this display
will completely turn off. In case of rotating the
Programme Selection knob or pressing any
button, lights and display will restore to their
previous condition. Your selections made while
exiting the energy saving mode may change.
Check the appropriateness of your selections
before starting the programme. Readjust if
necessary. This is not a fault.