Beko WMB 71231B, Руководство пользователя

Страница: 28 / 40

28 / EN
Washing Machine / User‘s Manual
Operating the product
can avoid any changes in a running programme.
C
If the Programme Selection knob is
turned when the Child Lock is active,
“Con” appears on the display. The
Child Lock does not allow any change
in the programmes and the selected
temperature, speed and auxiliary
functions.
C
Even if another programme is selected
with the Programme Selection knob
while the Child Lock is active, previously
selected programme will continue
running.
To activate the Child Lock:
Press and hold 1
st
and 2
nd
Auxiliary Function
buttons for 3 seconds. The lights on the 1
st
and
2
nd
Auxiliary Function buttons will flash, and
"C03", "C02", "C01" will appear on the display
respectively while you keep the buttons
pressed for 3 seconds. Then, "Con" will appear
on the display indicating that the Child Lock is
activated. If you press any button or turn the
Programme Selection knob when the Child
Lock is active, same phrase will appear on the
display. The lights on the 1st and 2nd auxiliary
function buttons that are used to deactivate
the Child Lock will blink 3 times.
To deactivate the Child Lock:
Press and hold 1
st
and 2
nd
auxiliary function
buttons for 3 seconds while any programme is
running. The lights on the 1
st
and 2
nd
Auxiliary
Function buttons will flash, and "C03", "C02",
"C01" will appear on the display respectively
while you keep the buttons pressed for 3
seconds. Then, "COFF" will appear on the
display indicating that the Child Lock is
deactivated.
C
In addition to the method above, to
deactivate the Child Lock, switch the
Programme Selection knob to On /
Off position when no programme is
running, and select another programme.
C
Child Lock is not deactivated after
power failures or when the machine is
unplugged.
5.13 Progress of programme
Progress of a running programme can be
followed from the Programme Follow-up
indicator. At the beginning of every programme
step, the relevant indicator light will turn on and
light of the completed step will turn off.
You can change the auxiliary functions, speed
and temperature settings without stopping
the programme flow while the programme
is running. To do this, the change you are
going to make must be in a step after the
running programme step. If the change is not
compatible, relevant lights will flash for 3 times.
C
If the machine does not pass to the
spinning step, Rinse Hold function
might be active or the automatic
unbalanced load detection system
might be activated due to the
unbalanced distribution of the laundry
in the machine.
5.14 Loading door lock
There is a locking system on the loading door of
the machine that prevents opening of the door
in cases when the water level is unsuitable.
Loading door light will start flashing when the
machine is switched to Pause mode. Machine
checks the level of the water inside. If the
level is suitable, Loading Door light illuminates
steadily within 1-2 minutes and the loading
door can be opened.
If the level is unsuitable, Loading Door light
turns off and the loading door cannot be
opened. If you are obliged to open the Loading
Door while the Loading Door light is off, you
have to cancel the current programme; see
"Canceling the programme".
5.15 Changing the selections after
programme has started
Switching the machine to pause mode
Press the Start / Pause button to switch the
machine to pause mode while a programme
is running. The light of the step which the
machine is in starts flashing in the Programme
Follow-up indicator to show that the machine