Beko WMB 51031 PL PT, Руководство пользователя

Страница: 48 / 57

51
EN
Time delay
With the “Time delay” function you can
delay the program startup up to 19
hours. Time delay can be increased in
one-hour increments.
C
Do not use liquid detergent when you
set time delay! There is the risk of
staining of the clothes.
1. Open the loading door, place the
laundry inside and fill detergent drawer.
2. Select the washing program,
temperature, spin speed and, if
required, the auxiliary functions.
3. Pres “Time Delay” button to adjust the
desired time.
4. Press "Start/Pause" button. The time
delay will start to count down. The set
time delay is displayed. The "_" symbol
displayed near the time delay starts
flickering up and down.
C
Additional laundry may be loaded
during the time delay period.
5. The selected program duration is
displayed at the end of the countdown
process. "_" symbol disappears and the
selected program starts.
Changing the delay time
If you want to change the time during
the countdown:
1. Press the time delay button. Every time
the button is pressed, the time will be
increased in 1-hour increments.
2. If you wish to shorten the time delay,
keep on pressing the time delay button
until the time delay you would like to set
appears on the screen.
Canceling the time delay
If you want to cancel the time delay
countdown and start the program:
1. Set the Time Delay to zero or turn
the Program selection knob to any
program. Thus, the time delay will be
cancelled. The “
” (End/Cancel) light
flashes continuously. Then, select the
program you wish to run again.
2. Press "Start/Pause" button to start the
program.
Starting the Program
1. Press "Start/Pause" button to start the
program.
2. Program follow-up lamp showing the
startup of the program will light up.
C
If no program is started or no key is
pressed within 1 minute during program
selection process, the machine will
switch to "Stand-by" mode and the
illumination level of the temperature,
speed and door indicators will
decrease. Other lights and indicators
will turn off. In case of turning the
program selection knob or pressing any
button, lights and indicators will turn on.
Progress of program
Progress of a running program is shown
through the program follow-up indicator.
At the beginning of every program step,
the relevant indicator LED will light up
and light of the completed step will turn
off.
You can change the auxiliary functions,
speed and temperature settings without
stopping the program flow while the
program is running. However, the
change to be made must be compatible
with the program step the machine
is currently in. If the change is not
compatible, relevant lights will flash for 3
times.
C
If the machine is not spinning, the
program may be in rinse hold mode or
the automatic spin correction system
has been activated due to an excessive
unbalanced distribution of laundry in the
machine.
Changing the selections after
the program has started
Switching the machine to standby
mode
Press the “Start/Pause” button to switch
the machine to pause mode while a
program is running. The light of the step
which the machine is in starts flashing in
the program follow-up indicator to show
that the machine has been switched to
the pause mode. Also, when the door
is ready to be opened, "Door" light will
also illuminate continuously in addition
to the program step light. If necessary
conditions to open the door are not met,
the "Door" light will remain off.
Changing the speed and
temperature settings for auxiliary
functions
Auxiliary functions can be cancelled
or selected, or the spin speed and
temperature settings can be changed in
accordance with the step the program
is in. If the change can not be made,
relevant light will flash for 3 times.