Washing Machine / User‘s Manual
23 / 36 EN
Operating the product
5.10 Auxiliary function selection
Use the following auxiliary functions according
to your daily needs. Select the desired auxiliary
functions before starting the programme.
Furthermore, you may also select or cancel
auxiliary functions that are suitable to the running
programme without pressing the Start / Pause
button when the machine is operating. For this,
the machine must be in a step before the auxiliary
function you are going to select or cancel.
If the auxiliary function cannot be selected or
canceled, light of the relevant auxiliary function will
blink 3 times to warn the user.
C
Some functions cannot be selected
together. If a second auxiliary function
conflicting with the first one is selected
before starting the machine, the function
selected first will be canceled and the
second auxiliary function selection will
remain active. For example, if you want to
select Quick Wash after you have selected
the Prewash, Prewash will be canceled
and Quick Wash will remain active.
C
An auxiliary function that is not
compatible with the programme cannot
be selected. (See “Programme and
consumption table”)
C
Auxiliary Function buttons may vary
according to the model of the machine.
• Prewash
A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save energy,
water, detergent and time.
C
Prewash without detergent is
recommended for tulle and curtains.
• Quicker Wash
This function can be used in Cottons and
Synthetics programmes. It decreases the washing
times and also the number of rinsing steps for
lightly soiled laundry.
C
When you select this function, load
your machine with half of the maximum
laundry specified in the programme table.
• Rinse Plus
This function enables the machine to make
another rinsing in addition to the one already made
after the main wash. Thus, the risk for sensitive
skins (babies, allergic skins, etc.) to be effected
by the minimal detergent remnants on the laundry
can be reduced.
• Anti-Creasing
This function creases the clothes lesser when they
are being washed. Drum movement is reduced and
spinning speed is limited to prevent creasing. In
addition, washing is done with a higher water level.
Use this function for delicate laundry that creases
easily.
• Rinse Hold
If you are not going to unload your clothes
immediately after the programme completes, you
may use rinse hold function to keep your laundry
in the final rinsing water in order to prevent them
from getting wrinkled when there is no water in
the machine. Press Start / Pause button after this
process if you want to drain the water without
spinning your laundry. Programme will resume and
complete after draining the water.
If you want to spin the laundry held in water, adjust
the Spin Speed and press Start / Pause button.
The programme resumes. Water is drained,
laundry is spun and the programme is completed.
Delayed Start
(In some models only)
With the Delayed Start function the startup of the
programme may be delayed up to 3, 6 or 9 hours.
C
Do not use liquid detergents when you set
Delayed Start! There is the risk of staining
of the clothes.
1. Open the loading door, place the laundry and put
detergent, etc.
2. Select the washing programme, temperature,
spin speed and, if required, the auxiliary
functions.
3. Set the desired time by pressing the Delayed
Start button. When the button is pressed once,
3 hours delayed start is selected. When the
same button is pressed again, 6 hours delay is
selected, and when it is pressed for the third
time, 9 hours delayed start is selected. If you
press the Delayed Start button once again,
Delayed Start function will be canceled.
