Washing Machine /User’s Manual
35 / EN
Maintenance and cleaning
A
CAUTION:
Never use sponge or scrub
materials. These will damage the painted
and plastic surfaces.
6.3 Cleaning the body
and control panel
Wipe the body of the machine with soapy water or
non-corrosive mild gel detergents as necessary,
and dry with a soft cloth.
Use only a soft and damp cloth to clean the
control panel.
6.4 Cleaning the water intake filters
There is a filter at the end of each water intake
valve at the rear of the machine and also at the
end of each water intake hose where they are
connected to the tap. These filters prevent the
foreign substances and dirt in the supply water to
enter into the machine. Filters should be cleaned
when they become dirty.
1. Close the taps.
2. Remove the nuts of the water intake hoses to
access the filters on the water intake valves.
Clean them with an appropriate brush. If the
filters are too dirty, remove them from their
places with a pliers and clean in this way.
3. Take out the filters on the flat ends of the water
intake hoses together with the gaskets and
clean thoroughly under running water.
4. Replace the seals and filters carefully and
tighten their nuts by hand.
6.5 Draining remaining water
and cleaning the pump filter
The filter system in your machine prevents solid
items such as buttons, coins and fabric fibers
clogging the pump impeller during discharge
of washing water. Therefore the waste water is
discharged without any problems and the service
life of the pump is increased.
If the machine does not drain the water, pump
filter may have been clogged. Filter should be
cleaned when clogged or once in 3 months.
In order to clean the pump filter, first the water
should be drained.
Also, before transporting the machine (for
example when moving to new house) and when
the water has the risk of freezing, water may have
to be fully drained.
A
CAUTION:
Foreign objects which stay
inside the pump filter may damage your
machine or cause noise problem.
CAUTION:
If the product is not being
used, shut the tap shut, remove mains
pipe and drain the water inside the
machine against any likely freezing.
CAUTION:
Shut the tap which the mains
pipe of the product is connected to after
each use.
In order to clean the dirty filter and discharge
the water:
1 Unplug the machine to cut off the supply power.
A
CAUTION:
Temperature of the water
inside the machine may rise up to 90 ºC.
To avoid the burning risk, clean the filter
after the water inside the machine is
cooled down.
