Beko WDIC752300F2, Руководство пользователя

Страница: 15 / 52

15 / EN
Washer-Dryer / User’s Manual
4.4 Initial use
Before starting to use the product make
sure that all preparations are made in
accordance with the “Important safety
and environment instructions” and the
instructions in the “Installation” section.
To prepare the product for washing laundry,
perform first operation in Drum Cleaning
programme. If this programme is not
available in your machine, apply the method
which is described in the section 6.2.
C
INFORMATION
• Use an anti-limescale product suitable
for the washing machines.
• Some water may remain in the product
due to the quality control processes in the
production. It is not harmful for the product.
4.5 Correct load capacity
The maximum load capacity depends on
the type of laundry, the degree of soiling
and the desired washing programme.
The product automatically adjusts
the water amount according to the
weight of the laundry put inside it.
A
CAUTION!
• Follow the information in the
“Programme and consumption table”.
When overloaded, machine’s washing
performance will drop. Moreover, noise
and vibration problems may occur. For
a successful drying performance, do
not dry more laundry than stated.
Laundry
type
Weight
(g)
Laundry
type
Weight
(g)
Bathrobe 1200 Hand towel 100
Fabric napkin 100 Women‘s
night gown
200
Bed sheet 700 Underclothing 100
Bed sheet 500 Men’s overalls 600
Pillowcase 200 Men’s shirt 200
Tablecloth 250 Men’s pyjamas 500
Towel 200 Blouses 100
4.6 Loading the laundry
1. Open the loading door.
2. Put the laundry items into the
product in a loose manner.
3. Push the loading door to close until
you hear a locking sound. Ensure that
no items are caught in the door.
C
INFORMATION
• The loading door is locked while a
programme is running. The loading door
is unlocked a while after the programme
comes to an end. If the inside part of
the machine is too hot at the end of
the programme, loading door will not
open until the temperature decreases.
A
CAUTION!
• If the laundry is misplaced,
noise and vibration problems
may occur in the machine.