Beko VCO 32804 AW, Руководство пользователя

Страница: 11 / 28

Vacuum Cleaner / User Manual
11 / EN
4 Cleaning and care
Switch off and unplug the appliance before
cleaning it.
A
WARNING:
Never use gasoline, solvent,
abrasive cleaning agents, metal objects or
hard brushes to clean the appliance.
4.1 Emptying the dust container
1. Press the dust container removal button (8) to
remove the dust container (4) and remove the
dust container in the direction of the arrow by
holding from the dust container carrying handle.
2. Open the lid of the dust container (4) by pressing
the inner latch and empty the container.
3. When you have emptied the dust, close the dust
container lid (4).
– A click will be heard.
4. Insert the dust container (4) into its place by
holding it from the handle.
4.2 Cleaning the filters
A
WARNING:
Do not use appliances
producing hot air such as hair dryer or heater
to dry the filters.
A
WARNING: Do not install the filters without
completely drying them; otherwise, smell of
moisture may occur during use, water can
leak from the back of the appliance or the
filters may get damaged.
A
WARNING:
Attach the filters into their
places after they have dried.
4.2.1 Motor protection filter and HEPA
filter
These filters are located on the rear side of the
dust container (4).
1. Press the dust container removal button (8) and
remove the dust container (4).
2. Remove the HEPA filter and motor protection
filter found at the back of the dust container (4).
3. After washing the sponge protection filter under
running water, wring it out slightly and leave it to
dry (for 24 hours minimum).
4. Shake off the HEPA inlet filter to eliminate the
dusts on it. After that, you can wash it by holding
its clean side under running cool water.
5. If you wash the HEPA filter, dry it at room
temperature (for 24 hours minimum). Do not
use it before ensuring that it is completely dry.