Beko Room Air Conditioner Скачать руководство пользователя страница 17

Страница: 17 / 18

Maintenance and Service

. Standard Split Type : Two different methods to open the front panel based on types of air

conditioner as below ;

Type 1:

Open the front panel as shown.
Then pull the filter tab slightly forward to remove the air filter.
After removing the air filter remove the

activion

and deodorizer filter by slightly pulling forward.

Plasma filter

Deodorizer

filter

Outdoor Unit

The heat exchanger coils and panel vents of the outdoor unit should be checked regularly.
If clogged with dirt or soot, the heat exchanger and panel vents may be professionally steam cleaned.

Dirty or clogged coils will reduce the operating efficiency of the system and cause higher operating costs.

NOTE

Operation Tips!

Self-Diagnosis Function

Error Display LED ( )

Check Point

• Indoor room temperature thermistor open/short.
• Indoor pipe temperature thermistor open/short.

(once)

3 sec

This unit has an inbuilt error diagnosis capability. Unit LED(

) will blink in case if thermistor fails.

Please contact your serviceman/dealer in such a situation

Do not overcool the room.

This is not good for the health and
wastes electricity.

Keep blinds or curtains

closed.

Do not let direct sunshine enter
the room when the air conditioner
is in operation.

Keep the room temperature

uniform.

Adjust the vertical and horizontal
airflow direction to ensure a
uniform temperature in the room.

Make sure that the

doors and windows

are shut thight.

Avoid opening doors and
windows as much as
possible to keep the cool
air in the room.

Clean the air filter

regularly.

Blockages in the air filter
reduce the airflow and
lower cooling and
dehumidifying effects.
Clean at least once every
two weeks.

Ventilate the room

occasionally.

Since windows are kept
closed, it is a good idea
to open them and
ventilate the room now
and ten.

Use high fan speed

for effective and fast

cooling.

The unit gives its rated
cooling capacity when the
fan speed is high.

Don't touch this

activion

filter within 10 seconds after opening the inlet grille, it may cause an electric shock.

Owner's Manual

Activion

filter

Deodorizer

filter

Содержание Room Air Conditioner



















Результаты поиска

Содержание Room Air Conditioner

Отзывы:

Бренды по названию

Популярные бренды

Beko Room Air Conditioner, Руководство пользователя

Результаты поиска

Содержание Room Air Conditioner

Отзывы:

Бренды по названию

Популярные бренды