Beko RCNE 365E40W, Руководство пользователя

Страница: 12 / 104

12 / 25 EN
Refrigerator/User Manual
4 Preparation
4.1 Things to be done
for energy saving
A
Connecting the product to
electric energy saving systems
is risky as it may cause damage
on the product.
•
Do not leave the doors of your
refrigerator open for a long time.
When doors are open,warm air enters
the fridge/freezer cabinets and the
appliance consumes more energy to
cool down the foodstuffs.
•
Do not put hot food or drinks in your
refrigerator.
•
Do not overload the refrigerator.
Cooling capacity will fall when the air
circulation inside is hindered.
•
Do not place the refrigerator in places
subject to direct sunlight. Install the
product at least 30 cm away from
heat sources such as hobs, ovens,
heater cores and stoves and at least 5
cm away from electrical ovens.
•
Pay attention to store your food in
refrigerator in closed containers.
•
The baskets/drawers that are
provided with the chill compartment
must always be in use for low energy
consumption and for better storage
conditions.
•
Food contact with the temperature
sensor in the freezer compartment
may increase energy consumption of
the appliance. Thus any contact with
the sensor(s) must be avoided.
•
You can load maximum amount of
food to the freezer compartment
of the refrigerator by removing
the freezer compartment drawers.
Declared energy consumption value
of the refrigerator was determined
with the freezer compartment
drawers and top compartment flap
removed and given wire shelf is
used at the bottom of the freezer
compartment for maximum amount
of food loaded. There is no risk in
using a shelf or drawer suitable for
the shapes and sizes of the foods to
be frozen.
•
Thawing frozen food in fridge
compartment will both provide
energy saving and preserve the food
quality.
•
Do not block the freezer fan grill by
placing foods in front.
cold pack
cold pack
foodstuffs
foodstuffs
PCM
TOP SHELF
OF FREEZER
COMPARTMENT
BOTTOM SHELF
OF FREEZER
COMPARTMENT
PCM