Beko HIS 64123 S, Руководство пользователя

Страница: 11 / 18

11 | EN
• Soapy part will froth if there is a
gas leakage. In this case, inspect
the gas connection once again.
Never use a match or lighter to
check for gas leakage.
Installation
1. Prepare the surface of the worktop
as shown in the figure.
2. The sealing gasket provided in the
package must be applied around
the hob from its lower surface as
shown in the figure, during
installation of the hob.
3. Center the appliance in the worktop.
4. Connect it to the holes in the lower
housing as indicated in the figure.
1 Hob
2 Fixing clamp
3 Worktop
»
Bottom view (clamp holes)
»
Secure the hob.
Clamping to different holes is not
a good practice in terms of safety
since it can damage the gas and
electrical system.
When installing the hob above a
cupboard, a dividing shelf as in
the above picture must be
installed. If installing above a
built-in oven this is not required.
If, for example, due to the fitting of the
appliance above a drawer, the underside of
the appliance is touchable, it must be
covered by a wooden plate.
1 min. 50 mm
Final check
1. Open gas supply.
2. Check gas installations for secure
fitting and tightness.
3. Ignite burners and check
appearance of the flame.
The flames should be blue and
burn smoothly. If the flames
appear yellowish, check secure
position of the burner cap or
clean the burner. Switch off gas
and let burner cool before
touching it.
Disposal
Disposing of packaging material
Packaging materials are dangerous to
children. Keep packaging materials in
a safe place out of reach of children.
Packaging materials of the product are
manufactured from recyclable
materials. Dispose of them properly