Beko HIS 64123 S, Руководство пользователя

Страница: 10 / 18

10 | EN
Room size Ventilation
opening
5 m
3
to 10 m
3
min. 50 cm
2
greater than 10 m
3
not required
In the cellar or
basement min. 65 cm
2
Installation and connection
• For installation the appliance must
be connected in accordance with
all local gas and/or electrical
regulations.
Connection to the mains supply
This appliance must be
earthed!
Our company shall not be held
responsible for any damage
caused by using the appliance
without an earthed socket.
Risk of electric shock, short
circuit or fire by unprofessional
installation!
The appliance may be connected
to the mains supply only by an
authorized qualified person and
the appliance is only guaranteed
after correct installation.
Risk of electric shock, short
circuit or fire by damage of the
mains lead!
The mains lead must not be
clamped, bent or trapped or
come into contact with hot parts
of the appliance.
If the mains lead is damaged, it
must be replaced by a qualified
electrician.
• The mains supply data must
correspond to the data specified
on the rating plate of the appliance.
The rating plate is located at the
rear housing of the appliance.
• The appliance mains cable must
correspond to the specifications
and the power consumption; see
Technical specifications, page 5
.
The plug should be easily
accessible after installation (but
not above the hob).
Plug the mains lead into the socket.
Risk of electric shock!
Before starting any work on the
electrical installation, please
disconnect the appliance from
the mains supply.
Connection to the gas supply
Risk of explosion or poisoning by
unprofessional installation.
The appliance may be connected
to the gas distribution system
only by an authorized qualified
person who is Gas Safe
registered.
Risk of explosion!
Before starting any work on the
gas installation, please shut off
the gas supply.
• "The adjustment conditions for this
appliance are stated on the label
(or data plate)."
See gas connection and conversion
details in the booklet given with your
appliance.
Leakage control at the connection
point
• Make sure that all knobs on the
appliance are turned off. Make
sure that the gas supply is on.
Prepare soapy foam and apply it
onto the connection edge of the
hose for gas leakage control.