Beko HCA62320B, Руководство пользователя

Страница: 8 / 258

8 / EN
Hood / User Manual
• You can illuminate the cooking area by pressing the light
key.( )
3.4 Lamp Replacement
Disconnect the hood from the mains supply. This appliance is
equipped with 3 W spot LED lamps.
A
Before replacing the light bulbs, disconnect
the power supply of the hood.
A
Do not touch the light bulbs when they are
hot.
A
Be careful not to touch the replaced light bulb
directly with hands.
C
You may procure lamps from Authorised
Service Agents.
3.1 Use of the Rocker Switch
The hood is equipped with a mechanical control.
•
Pressing the “0” - disables the hood.
•
Pressing the “1” - to turn the hood with a minimum speed.
• Pressing the “2” - turns the hood with an average speed.
• Pressing the “3” - turns the hood at maximum speed.
Higher speed means more air flow.
•
Press the button - to turn on the lights. Repeat pressing
the button to turn off the lighting.
3.2 Things to Do for Energy Saving
•
Ensure sufficient air intake to make the hood operate effi-
ciently and with low operation noise during cooking.
• Set the fan level according to the density of steam in kitchen.
Use the high level only when needed. A lower fan level
means less energy consumption.
•
If dense smoke is expected in the kitchen, select a higher
level of fan in advance. It is required to operate the hood
much longer to remove the smoke already spread all over
kitchen.
• Turn off the hood when not in use.
•
Clean or replace the filter at intervals stated, thus, the
efficiency of the ventilation is increased and the risk of fire
is eliminated.
3.3 Operating the Hood
•
Hood is equipped with a motor having various speed
settings.
•
For a better performance, we advise you to use low speeds
in normal conditions, and high speeds when smell and
vapors are intensified.
• You can start the hood by pressing the desired speed level
key.(1,2,3 )
1 2 3 0
Fig. 3
GU10
1
2
1
2
Symbol
Symbol
Bulb installation
Bulb dismantling
Fig. 4
Max:
3 W
3 Using the Appliance