14
/
/44 EN
Preparation
Adding salt
Water softening system needs to be
regenerated in order for the product
operates with the same performance
continuously. Dishwasher salt is used for
this purpose.
C
Use only special softening salts
produced particularly for the
dishwashers in your machine.
C
It is recommended to use
granule- or powder-formed
softening salts in the water
softening system. Do not use
salts that do not completely
dissolve in water such as table
salt or rock salt. Otherwise the
performance of the system may
deteriorate in time.
C
Salt reservoir will be filled
with water when you start
the product. For this reason,
add salt before operating the
machine.
1. Firstly, take the lower basket out to add
softening salt.
2. Turn the salt reservoir lid counter-
clockwise to open it (A).
After detecting the water
hardness:
•
If the hardness level of the water
that you use is above 50°dH or if
you are using well water, than it is
recommended to use filter and water
purification devices.
•
If the hardness level of the water that
you use is below 7°dH, there is no
need to use salt in your dishwasher. In
this case, the Salt Indicator light on the
control panel of your dishwasher will
light continuously.
•
If the water hardness is set to
level 1, the Salt Indicator will light
continuously although it is not
necessary to use salt. If you use salt
under this condition, salt will not
be consumed and the lamp will not
illuminate.
When moving, you will need to set
the water hardness level of your
dishwasher again according to the
information above, depending on the
water hardness of the place you have
moved to. If the water hardness level
of your machine is adjusted previously,
your machine will display the most
recent hardness level adjustment.
