/
13 / 44 EN
Preparation
After the determination of the water hardness:
1. While the Program Selection Knob is “Off”, press and hold the Start / Pause / Cancel key and
rotate the Program Selection Knob one step clockwise and keep the Start / Pause / Cancel
key pressed for 3 seconds; the machine shall switch to regeneration setting mode after this
period.
2. The regeneration level in the memory is illuminated for 5 seconds when you enter the
regeneration setting mode.
3. For setting a new Water Hardness Level, bring the Program Selection Knob to the proper
position for the hardness level of your mains water. (See Water Hardness Level Setting Table)
4. Press the Start / Pause / Cancel key to record the selected setting in the memory.
5. Bring the Program selection knob to “Off” position.
1
2
5
3
4
Water hardness level setting table
Hardness
Level
English
Hardness °dE
German
Hardness °dH
French
Hardness °dF
Level of program
selection knob *
Water Hardness Level Indicator
0. Level
0-5
0-4
0-8
1
The Washing light on the panel
illuminates.
1. Level
6-9
5-7
9-13
1
2. Level
10-15
8-12
14-22
2
The Drying light on the panel
illuminates.
3. Level
16-19
13-15
23-27
3
The End light on the panel
illuminates.
4. Level
20-24
16-19
28-34
4
The Washing, Drying and End lights
on the panel illuminate.
5. Level
25-62
20-50
35-90
5
The Washing, Drying and End lights
on the panel flashes with intervals of
1 second.
Unpack the test
strip.
Open the tap and
let the water flow for
approx. 1 minute.
Dip in the test strip
into the water for 1
second.
Take out the strip
from the water and
shake it.
Wait for 1 minute.
Make the necessary
adjustment according
to the test strip.
