
40 / EN
Dryer / User Manual
5.10 Changing the program
after the program has started
You can use this feature to dry your laundry
in a different program after your machine has
started to run.
For example;
Press and hold the “Start/Pause/Cancel” but-
ton for about 3 seconds to select “80” minutes
program instead of “60” minutes program.
Select the “80” minutes program by rotating
the program knob.
Press “Start/Pause/Cancel” button to start the
program.
C
The program which is selected first
will go on even if the program se-
lection button is moved and anoth-
er program mode is selected while
the machine is operating. You must
cancel the ongoing program in or-
der to change the drying program.
(See, Ending the program through
canceling)
Adding/removing laundry in standby
mode
In order to add or take out laundry after the
start-up of the program;
1. Press the “Start/Pause/Cancel” button to
switch the machine to “Pause” mode. Drying
process will stop.
2. Open the door at Pause position and close it
again after adding or taking out laundry.
3. Press “Start/Pause/Cancel” button to start
the program.
C
Any laundry added after the drying
process was started may cause the
already dried clothes in the ma-
chine intermingle with wet clothes
and the result will be wet laundry
after the drying process is over.
C
Laundry may be added or taken
out as much as desired during a
drying process, but as this process
will interrupt drying continuously,
it will extend the program duration
and increase energy consumption.
Therefore, it is recommended to
add laundry before the drying pro-
gram is started.
5.6 Auxiliary function
Low temperature
This function allows for drying at lower tem-
peratures and therefore saves energy.
Warning LED will light up when you select the
function.
C
You must use this function when
you dry your synthetic or delicate
laundry.
5.7 Warning indicators
C
Warning indicators may differ ac-
cording to the model of your ma-
chine.
Filter cleaning
A warning LED will light up to remind filter
cleaning after the program finishes.
C
If the filter cleaning warning LED
lights up continuously, please refer
to, “Solution suggestions for prob-
lems”.
5.8 Starting the Program
1. Press “Start/Pause/Cancel” button to start
the program.
2. “Start/Pause/Cancel” button will light up to
indicate that the program has started.
5.9 Timer follow-up indicator
One of the lamps is on as far as program runs
and shows the approximate remaining time.
C
LEDs on the timer follow-up indica-
tor will also flash when the child-
proof lock is activated.
A
If more than one LED light up or
flash concurrently, it means there is
malfunctioning or a failure (please
see, Solution suggestions for prob-
lems).
Содержание DV 7110
Страница 65: ...65 DA Tørretumbler Brugermanualen ARing til autoriseret service hvis problemet fortsætter ...
Страница 67: ......
Страница 68: ......