Beko DPY 7406 GXB3, Руководство пользователя

Страница: 21 / 60

21 / 60 EN
Dryer / User Manual
Operating the product
EN
Programs Capacity (kg)
Spin speed in washing
machine (rpm)
Approximate amount
of remaining humidity Drying time (minutes)
Cottons / Coloreds
A
Extra dry 7 1000 % 60 165
A
Cupboard dry 7 1000 % 60 155
A
Iron dry 7 1000 % 60 125
Night (silent)
7 1000 % 60 220
Jeans
4 1200 %50 117
Daily
4 1200 %50 100
Wool protect
1.5 600 %50 146
Express
1 1200 %50 49
Delicates
2 600 %40 50
Babyprotect
3 1000 % 60 95
Synthetics
B
Cupboard dry 3.5 800 % 40 67
B
Iron dry 3.5 800 % 40 53
Energy consumption values
Programs Capacity (kg)
Spin speed in washing
machine (rpm)
Approximate amount
of remaining humidity
Energy consumption
value kWh
Cottons linen Ready to wear*
7 1000 % 60 1,25
Cottons Ready to iron
7 1000 % 60 1,05
Synthetics Ready to wear
3.5 800 % 40 0,51
Power consumption of the off-mode for the standart cotton programme at full load, PO (W)
0,5
Power consumption of the left-on mode for the standart cotton programme at full load, PL (W)
1,0
Contains fluorinated greenhouse gases covered by the Kyoto Protocol. Hermetically sealed.R134a / 0,520 kg
5.8 Auxiliary functions
Sound warning cancel
Drying machine makes sound warnings when the
program is completed. If you don’t want sound
notifications, press the “Sound Notification” button.
When you press the sound notification button it lights
up, and program does not make sound notifications
when completed.
C
You can select this function before or
after the program starts.
5.9 Warning symbols
C
Warning symbols may vary according to
the specifications of your machine.
Fiber filter cleaning
When the program is completed, a warning led lights
up, which indicates that the filter has to be cleaned.
C
If the filter cleaning led blinks, see the
„Troubleshooting“ chapter.
Water tank
When the program is completed, a warning led lights
up, which indicates that the water tank must be
emptied.
If the water tank fills up while the program is running,
warning led starts blinking and the machine goes into
stand-by. In that case empty the water in the water tank
and start the program by pressing the Start / Pause
button. Warning led turns off and the program resumes.
Loading door open
Start/Pause led blinks when the loading door of the
drying machine is open.
5.10 End duration
You can delay the end duration of the program for up to
24 hours with the end duration function.
1. Open the loading door and place your laundry.
2. Select the drying program.
3. Press the end duration selection button and set the
delay duration you want.
End duration led lights up. (End duration moves
continuously when you keep pressing the button).
4. Press the Start / Pause button. End duration
countdown begins. The “:” sign in the middle of
the displayed delay duration blinks.
C
You can add or remove laundry for the
duration of the end duration. The duration
displayed on the screen is the sum of
the normal drying duration and the end
duration. At the end of the countdown the
end duration led turns off, drying beings
and drying led lights up.
Changing the end duration
If you want to change the duration during the
countdown:
1. Cancel the program by pressing the On/Off button.
Turn on the drying machine again by pressing the
On/Off button. When your drying machine turns on
for the first time, it turns on with the declaration
(cotton wardrobe dryness) program.
2. Select the program you desire using the Program
Selection knob.
3. Repeat the end duration operation for the duration
you want.
4. Start the program by pressing the Start / Pause
button.