![Beko DNE 61100 DPX Скачать руководство пользователя страница 15](http://html.mh-extra.com/html/beko/dne-61100-dpx/dne-61100-dpx_manual_2724576015.webp)
EN
14
Water Spring
In addition to allowing you to obtain cold
water without opening the door of your
refrigerator, this accessory also helps
you to save energy since you do not
need to open and close the door of your
refrigerator frequently and thus, the cold
air is kept inside.
Using the water spring
Press in the latch of the water spring
with your glass. Water spring will open
and water will pour into your glass.
Latch of the water spring will return to
its original position and water flow will
stop when you take your glass.
Filling in the water reservoir
Open the lid of the water reservoir
located inside of the door as
illustrated and fill in with water at room
temperature or colder using a carafe.
Close the lid.
You can remove the water reservoir to
fill it outside the refrigerator and also to
clean it.
You can easily carry the water reservoir
by its handle.
Warning!
Water spring is only intended for use
with drinking water. Do not put hot
water, juice, milk and gaseous or
alcoholic beverages into the water
reservoir.
If there is a power failure (water can not
be obtained from the water dispenser if
your refrigerator is not energized.)
Dripping Crenel
Water drops that drip while using
your water spring accumulates in
the dripping crenel at the lower side.
Remove the dripping crenel to remove
the accumulated water. You can remove
the water with a sponge or a soft cloth.
Cleaning the water reservoir
Take out the water reservoir after
removing the cover mechanism on the
left hand side as illustrated in the figure.
Clean the water reservoir with warm
water, replace it and close the cover on
the left hand side.
Make sure that the cover on the right
hand side fits into the water inlet hole
after installing the water reservoir.
Otherwise, water leakage may occur.
(Washing in the dishwasher may cause
the water reservoir to get scratched.)