Beko DIS39020, Инструкция по эксплуатации

Страница: 18 / 42

15
EN
4. Turn the rinse aid amount
adjuster manually to a position
between 1 and 6 (4). If there are
stains on tableware items after
washing, level must be increased
and if there is a blue trace after
wiping them by hand, it must be
decreased. This is set to position 4
as factory default.
Items not suitable for washing in
the dishwasher
•
Never wash dishes soiled by
cigarette ash, candle remnants,
polish, dyestuff, chemicals, etc. in
your dishwasher.
•
Do not wash iron alloy items
in the dishwasher. It can get
corroded or leave stains on other
items.
•
Do not wash silverware and
cutlery with wooden or bone
stems, glued pieces, or pieces
that are not resistant to heat,
as well as copper and tin-plated
containers in the dishwasher.
C
Decorative prints of chinaware as
well as aluminum and silver items
may get discoloured or tarnished
after washing in the dishwasher
just as it happens in handwashing
Rinse aid
C
The rinse aid used in dishwashers
is a special combination used to
increase drying efficiency and
prevent water or limescale stains
on the washed items. For this
reason, care must be paid to have
rinse aid in the rinse aid reservoir
and to use rinse aids produced
specially for dishwashers only.
Check Rinse Aid Indicator to
determine whether it is necessary
to add rinse aid or not 3 (depends
on the model). Having a dark light
on the indicator shows that there
is sufficient amount of rinse aid in
the dispenser. If the colour of the
indicator is light, add rinse aid.
1. Open the lid of the rinse aid
reservoir by pressing its latch (B).
2. Fill the reservoir until “MAX” level.
3. Close the lid of the reservoir by
pressing on it lightly.
C
Wipe clean any spilled rinse aid
outside the reservoir. Rinse aid
that spilled accidentally will cause
foaming and it will eventually
decrease washing performance.