Beko DIN29X20 страница 32 Скачать руководство пользователя

Страница: 32 / 45

Dishwasher / User’s Manual

/43 EN

Operating the product

InnerClean

This programme is recommended to be

operated on each 1-2 months for machine

cleaning and necessary hygiene. The

programme should be operated while the

machine is empty.

In order to achieve an efficient result, it is

recommended to use together with special

machine cleaning agents.

Do not use this programme to

clean dishes. As it operates in

high temperatures, it is harmful

for the dishes.

Water cut-off warning

If mains water is cut or water inlet tap

is turned off the machine cannot take

water in and E:02 icon will flash on the

programme indicator. As long as the

problem continues, washing programme

is paused and the water inlet is checked

regularly by the machine; when the water

is restored E:02 icon will disappear after

a while and the washing programme

resumes.

Overflowing warning

If the machine intakes too much water or

there is leakage at any of the components

then the machine will detect this and E:01

icon will flash on the Programme indicator.

As long as the overflowing continues

safety algorithm will be active and try

to discharge the water. If overflowing

stops and safety is assured, E:01 icon

will disappear. If E:01 does not disappear,

there is a permanent fault. In this case the

authorised service should be contacted.

End of programme

When the programme you have

selected comes to an end, an

audible warning signal will warn

you to turn off your machine.

This audible signal will warn you

with certain intervals before it

turns off.

End of Programme indicator will light up

when the washing programme is over.

1. Open the door of the machine.
2. Press On/Off key to turn off your

machine.

3. Close the tap.
4. Unplug the machine from the socket.

For energy saving, the machine

is automatically turned off

following the completion of the

programme or if the programme

is not started.

Leave your dishes in the

machine for about 15 minutes

to allow them cool down after

they are washed. Your dishes

will dry in a shorter time if you

leave the door of your machine

ajar during this period. This

process will increase the drying

effectiveness of your machine.

3. Set to the appropriate level with the

Time Delay key.

4. Press On / Off key to save the setting.
No rinse aid dispensed in P:0 wash position.

1 dose of rinse aid is dispensed in P:1

position.

2 doses of rinse aid are dispensed in P:2

position.

3 doses of rinse aid are dispensed in P:3

position.

4 doses of rinse aid are dispensed in P:4

position.

Содержание DIN29X20














































Результаты поиска

Содержание DIN29X20

Отзывы:

Похожие инструкции для DIN29X20

Бренды по названию

Популярные бренды

Beko DIN29X20, Руководство пользователя

Результаты поиска

Содержание DIN29X20

Отзывы:

Похожие инструкции для DIN29X20

Бренды по названию

Популярные бренды