background image

18

Dishwasher / User’s Manual

/43 EN

Preparation

4.   If there are stains on tableware items 

after washing, level must be increased 

and if there is a blue trace after wiping 

them by hand, it must be decreased. 

This is set to position 3 as factory 

default. 

C

The rinse aid adjustment is 

described under "Adjusting 

the amount of rinse aid" in 

the section for operating the 

machine.

C

Wipe clean any spilled rinse aid 

outside the reservoir. Rinse 

aid that spilled accidentally 

will cause foaming and it will 

eventually decrease washing 

performance.

Items not suitable for 

washing in the dishwasher

 

Never wash dishes soiled by cigarette 

ash, candle remnants, polish, dyestuff, 

chemicals, etc. in your dishwasher.

 

Do not wash silverware and cutlery 

with wooden or bone stems, glued 

pieces, or pieces that are not resistant 

to heat, as well as copper and tin-

plated containers in the dishwasher.

C

Decorative prints of chinaware 

as well as aluminum and silver 

items may get discoloured 

or tarnished after washing 

in the dishwasher just as it 

happens in handwashing as 

well. Some delicate glass types 

and crystals may become dull in 

time. We strongly recommend 

you to check if the tableware 

you are going to purchase is 

suitable for washing especially 

in the dishwasher.

Placing the dishes into the 

dishwasher

You can use your dishwasher in the 

optimum way with respect to energy 

consumption and washing and drying 

performance only if you place the dishes in 

an orderly way.

 

Wipe away any coarse food 

remnants (bones, seeds, etc.) on the 

dishes before placing them in the 

dishwasher.

 

Place thin, narrow pieces in the middle 

sections of baskets if possible.

 

Place the heavily soiled and bigger 

items in the lower basket and smaller, 

delicate and light items in the upper 

basket.

 

Place the hollowed dishes such as 

bowls, glasses and pans upside down 

in the dishwasher. Thus, accumulation 

of water in deep hollows is prevented.

A

To prevent possible injuries, 

always place the sharp and 

pointed dishes such as service 

fork, bread knife, etc. upside 

down so as their pointed ends 

will face down or they will lie 

horizontally in the dish basket.

Unload dishes in the lower basket first and 

then the dishes in the upper basket.

Suggestions for loading the dishwasher

Lower basket

Upper basket

Improper Loading Of Dishware

Improper Loading Of Dishware

Содержание DIN29X20














































Отзывы: