Beko DIM 4504 P, Руководство пользователя

Страница: 15 / 27

15 / EN
Dry Iron / User Manual
For commissioning, general use and cleaning, please observe the in-
structions on page 4 of this operating manual.
4.1 Defects and repairs
Do not attempt to replace a damaged power cord. The appliance has to be
returned to an authorized service centre for repair.
Problem Possible solution
Iron emits an odor or
smoke
Iron gives off an odor when turned on for the first
time. Oils used during manufacture need to be burnt
off, allow ten minutes for odor to disappear.
Iron does not heat The iron should be plugged into a 230 Volt , AC elec-
trical outlet only. The temperature dial must be set
to the desired temperature.
4 Troubleshooting