Dishwasher / User’s Manual
23 / 34
EN
Operating the product
11. Start the programme by pressing Start
/ Stop key.
C
Programme and auxiliary
functions cannot be set/
changed after the programme
has started.
C
Your machine performs water
softening depending on the
hardness level of the supply
water. The total time can also
change while the programme
is running depending on the
ambient temperature where
your machine is installed,
temperature of the supply
water and amount of the
dishes.
A
Pay attention not to open the
door of the machine when it is
running. If you need to open the
door, safety system will stop
your machine. There may be a
rush of vapour when you open
the door of your machine; be
careful. Washing programme
will resume running when you
close the door.
Half Load function
It is used to operate the machine without
loading it completely.
1. Load your dishes in the machine using
top and bottom baskets
2. Turn the machine on.
3. After selecting the desired programme,
press the Half Load key. Half Load
indicator lights up.
4. Close your machine’s door and press
Start / Stop key.
C
With the Half Load function you
can save both water and power
while using the lower and upper
baskets of the machine.
C
Half Load function may cause
changes in the programme
duration.
Time Delay
Using the Delayed Start button, you may
delay the starting time of your programme
up to 9 hours. After delaying the start,
press Start/Cancel button and close the
door of your machine. Once the delay time
is over, the selected programme will start
automatically.
Cancelling the delay function
Keep the Start/pause/cancel button
pressed for 3 seconds. The selected delay
period will be cancelled.
As soon as the cancelling starts, the water
remaining in your machine will be drained
for 30 seconds due to safety reasons.
How to cancel the washing
Programme
To cancel a programme while the machine
is operating:
Press start/stop key for 3 seconds. The
machine will drain the water inside the
machine for 45 seconds. The programme
is cancelled when washing light goes off.
Then, you can choose and start a new
programme.
C
There might be residues of
detergent or rinse aid left in the
machine and / or on the pieces
being washed depending on the
step the programme you have
cancelled was in.