Dishwasher / User’s Manual
13 / 50 EN
PreparatIon
Unpack the test
strip.
Open the tap and
let the water flow for
approx. 1 minute.
Dip in the test strip
into the water for 1
second.
Take out the strip
from the water and
shake it.
Wait for 1 minute.
Make the necessary
adjustment
according to the test
strip.
After detecting the water hardness:
1. Press the Settings menu key after switching on your machine. After the countdown (3, 2, 1)
is displayed keep the keys pressed for a while.
2. Use menu direction selection keys to go to (r) on the display.
3. Using the Settings menu key, adjust water hardness level according to the hardness of the
supply water. See “Water hardness level adjustment table” for correct setting.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness
Level
English Water
Hardness °dE
German Water
Hardness °dH
French* Water
Hardness °dF
Water Hardness Level Indicator
Level 0
0-5
0-4
0-8
Press the Settings menu key to set the water hardness level
to position 1 (r1).
Level 1
6-9
5-7
9-13
Level 2
10-15
8-12
14-22
Press the Settings menu key to set the water hardness level
to position 2 (r2).
Level 3
16-19
13-15
23-27
Press the Settings menu key to set the water hardness level
to position 3 (r3).
Level 4
20-24
16-19
28-34
Press the Settings menu key to set the water hardness level
to position 4 (r4).
Level 5
25-62
20-50
35-90
Press the Settings menu key to set the water hardness level
to position 5 (r5).
If the hardness level of the water that you use is above 90°dF (French standard for water
hardness) or if you are using well water, than it is recommended to use filter and water
purification devices.
Since your machine has an Automatic Water Hardness Detection System, you need to add salt
suitable for the dishwasher when the Salt Indicator light turns on.
If you do not add salt, the Automatic Water Hardness Detection System will not function
correctly.