Dishwasher / User’s Manual
13 / 41
EN
Preparation
a
b
c
d
e
f
Remove the test
strip from the
packet.
Turn on the tap and
let the water run for
about a minute.
Hold the test strip in
the water for about
a second.
Remove the test
strip from the water
and shake it.
Wait for 1 minute. The test strip shows
you the hardness
level.
1 Second
1 Minute
1 min.
After determining hardness level of the supply water:
1. Turn on the machine, press Time Delay and P+/P keys simultaneously. After the
countdown (3,2,1) is displayed keep the keys pressed for a while.
2. Press P+/P key to activate the (r..) position.
3. Using Time Delay key, adjust water hardness level according to the hardness of the supply
water. See “Water hardness level adjustment table” for correct setting.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness
Level
English Water
Hardness °dE
German Water
Hardness °dH
French Water
Hardness °dF Water Hardness Level Indicator
0th Level
0-5
0-4
0-8
Press the Time Delay key to switch the water hardness level
to position 1. (r1)
1st Level
6-9
5-7
9-13
2nd Level
10-15
8-12
14-22
Press the Time Delay key to switch the water hardness level
to position 2. (r2)
3rd Level
16-19
13-15
23-27
Press the Time Delay key to switch the water hardness level
to position 3. (r3)
4th Level
20-24
16-19
28-34
Press the Time Delay key to switch the water hardness level
to position 4. (r4)
5th Level
25-62
20-50
35-90
Press the Time Delay key to switch the water hardness level
to position 5. (r5)
Perform the same hardness level adjustment that you have set on the control panel also
with the regeneration adjustment switch. For example, if you have adjusted to “3rd level” in
the control panel, also set the regeneration adjustment switch to 3rd level.
Regeneration Adjustment Switch
0th Level 1st Level 2nd Level 3rd Level
4th Level 5th Level
1
1
2
3
4
5
