Beko CWB 6441 AN, Руководство пользователя

Страница: 5 / 20

Hood / User Manual
5 / EN
•
Use the appliance with a grounded out-
let only.
WARNING:
Do not connect the appli-
ance to the mains until the installation
is fully complete.
•
Place the appliance in a way so that the
plug is always accessible.
•
Do not touch the lamps if they have op-
erated for a long time. They can burn
your hands since they will be hot.
•
Follow the regulations set out by com-
petent authorities on discharge of the
exhaust air (this warning is not applica-
ble for use without flue).
•
Operate your appliance after putting
a pot, pan etc. on the hob. Otherwise,
high heat may cause deformation in
some parts of your product.
•
Turn off the hob before taking the pot,
pan etc. from it.
•
Do not leave hot oil on the hob. Pans
with hot oil may cause self combustion.
•
Pay attention to your curtains and cov-
ers since oil may catch fire while cook-
ing food such as fries.
•
Grease filter must be replaced at least
monthly. Carbon filter must be replaced
at least every 3 months.
•
Product shall be cleaned accordance
with user manual. If cleaning was not
carried out in accordance with user
manual, there may be fire risk.
•
Do not use non-fire-resistant filtering
materials instead of the current filter.
•
Only use the original parts or parts rec-
ommended by the manufacturer.
•
Do not operate the product without the
filter and do not remove the filters while
the product is running.
•
In the event of be started any flame,
de-energize your product and cooking
appliances.
•
In the event of be started any flame,
cover the flame and never use water to
extinguish.
•
Unplug the appliance before each
cleaning and when the appliance is not
in use.
•
The negative pressure in the environ-
ment should not exceed 4 Pa (4 x 10
bar) while the hood for electric hob and
appliances running on another type of
energy but electricity operate simulta-
neously.
•
In the environment where the appliance
is being used, the exhaust of devices
running on fuel oil or gas, such as room
heater must be absolutely isolated or
device must be hermetical type.
•
When connecting the flue, use pipes
with a diameter of 120 or 150 mm.
Pipe connection must be as short as
1
Important Safety and Environmental Instructions