GB
Instruction for use
Voice Recorder
is a compact electronic module, placed on the
upper door, covered by a plastic case.
The main functions are “voice recorder”,
“clock” and “alarm”.
1. Select - allows to chose a function
2. Adjust - modifies values for the selected
function
3. Play - plays a previously recorded
message
4. Record - allows to record a message
5. Timer counter display
6. Bell graphic sign
7. Clock display
8. Graphic sign for Voice Recorder
9. Voice recorder display
10. Microphone / speaker
Timer (alarm)
The display of the time at the end of which the
alarm will be active is indicated by a display (5).
After power is on, the value of the timer is set at
000 minute.
When Select button is pressed, timer counter
(5) digits will blink and the ring bell (6) sign will
be on. Press Adjust (2) button until you reach
the value you want to memorise. Selected value
is memorised and timer function becomes
active if Select button is pressed or no other
button will be pressed for 5 seconds. When the
time is elapsed, the alarm will be on and an
intermittent sound will be heard. The alarm will
automatically stop after 5 minutes, or when any
button will be pressed.
Clock
The clock function allows to display time in
electronic mode. If Select button (1) is pressed
twice, then hour can be adjusted. The hour
digits will blink for 5 s and value can be
changed using Adjust button (2). If Select
button is pressed one more time, selected
value for hour is stored and minute digits will
blink. Minute value can be modified by
pressing the Adjust button. The selected value
is stored, only if Select button is pressed. If
after the modification of the hour or minutes the
Select button is not pressed, the adjusted
value will not be saved.
Voice recorder
The Voice recorder function allows the user to
record a max 60 s message. A 30 s default
message is available when power is on, or
when the recorded message was deleted.
Envelope sign (8) indicates that a new
message is in memory and it was not read.
When a message is recorded and it was not
read, the graphic sygn envelope (8) is active.
A counter (9) displays the duration of the
record.
To record a message it is required to keep
pressed the Record button (4). Counter digits
(9) will blink then it will display the duration of
the record, which will remain until listening the
message. When Record button is released,
the envelope sign will be active and the
recorded message will be stored.
To listen a recorded message it is necessary to
press the Play button (3). After message was
played, envelope sign will be off, but recorded
message will not be deleted and can be
listened again. When the message is listened
the seconds counter will display the remaining
time until the message is finished. If the user
wants to stop listening the Play button will be
pressed again. When a new message is
recorded the previous one will be erased. If a
power cut occurs, or Record button is pressed
for 2 s, then the recorded message is deleted.
6
