Beko CM300, Инструкция по использованию

Страница: 11 / 24

EN
Instruction for use
Freezer operation.
The freezer is intended to keep the frozen
food for a long time, as well as to freeze fresh
food.
One of the main elements for a successful
food freezing is the packing.
The main conditions that the packing must
fulfill are the following: to be airtight, to be
inert towards the packed food, to resist to low
temperatures, to be proof to liquids, grease,
water vapours, smells, to be able to be
washed.
These conditions are fulfilled by the following
types of packings: plastic or aluminium film,
plastic and aliminium vessels, waxed
cardboard glasses or plastic glasses.
IMPORTANT!
- For freezing the fresh food please use the
supplied baskets of the appliance.
- Do not place into the freezer a too large
quantity of food at a time. The quality of the
food is best kept if they are deeply frozen as
quickly as possible. This is why it is advisable
not to exceed the freezing capacity of the
appliance specified in the "Product Fiche".
In order to reduce the freezing time, push the
button for „fast freeze”.
- The fresh food must not come into contact
with the food already frozen.
- The frozen food you have bought can be
placed into the freezer without having to
adjust the thermostat.
- If the freezing date is not mentioned on the
packing, please take into consideration a
period of max. 3 months, as a general guide.
- The food, even partially defrosted, cannot be
frozen again, it must be consumed
immediately or cooked and then refrozen.
- The fizzy drinks will not be kept in the
freezer.
- In case of a power failure, do not open the
door of the appliance.
Replacing the interior light bulb
To change the Bulb/LED used for illumination
of your refrigerator, call your Authorised
Service.
The lamp(s) used in this appliance is not
suitable for household room illumination. The
intended purpose of this lamp is to assist the
user to place foodstuffs in the
refrigerator/freezer in a safe and comfortable
way.
The lamps used in this appliance have to
withstand extreme physical conditions such as
temperatures below -20°C.
Mounting of the water collection tray
The tray for the water collection, (delivered with
the appliance) must be mounted in the rear of
it, under the condenser, on the metal fixing
part. It is mounted on the eyes of the metal
parts by its displacement in the direction
shown by the arrow (Item 6). The tray will be
detached from the fixing part if you want to
move the appliance from one place to another,
mounting it back after moving (Item 7).
Way of energy saving

Avoid to place the appliance in a sunny
place or near a heat source.

Provide the good ventilation of the
compressor and condenser.

Do not leave the door open more than
necessary and open it only when it is
required.

Keep the condenser clean (the piping at the
rear of the appliance).

For the most efficient operation try to
maintain an ambient below 27ºC and 65%
RH (Relative Humidity)".
5