28 / EN
Fully Automatic Coffee Maker / User Manual
Problem
Cause
Solution
The appliance does not
work.
The appliance is not
connected to the mains.
Plug in and press the
switch.
Check the cable and the
Plug
No or delayed response in
several trials of pressing on
function key on the panel
Appliance is under
an electromagnetic
interference
Dirt over the panel
Unplug the appliance.
Restart after few minutes
Clean the panel with the
cloth provided
The coffee is not hot
enough.
The cups have not been
preheated.
The brewing unit is too
cold.
Rinse the appliance at least
3 times before making the
coffee.
The coffee cannot come out
from spout.
Empty system function
maybe used before.
Press the hot water button
until water can come out
from spout.
The first cup of coffee is
poor quality.
The first run of grinder does
not pour sufficient quantity
coffee power into the
brewing unit.
Throw the coffee away. The
other coffees will always be
of good quality.
Coffee has no cream.
Not pressing the touch
button from the front
direction of the appliance
Press the lower bottom
part of the icon of the
touch button from the front
direction of the appliance.
The touch buttons are not
sensitive
Excessive scale has built
up.
Descale the appliance.
The water tank is removed
/ the water level is very low
in the water tank but
have no alert.
The area near the water
tank connector is wet.
Wipe the water around the
water tank connector
Internal drip tray is filled
with a lot of water.
Coffee powder too fine
which block the water to
come out.
Adjust the coffee fineness
to bigger dot during grinder
operation.
6 Troubleshooting
