Beko CEG5331X, Руководство пользователя

Страница: 35 / 289

35 / EN
Fully Automatic Coffee Machine / User Manual
Problem Cause Solution
No milk foam out from the
machine
The hole of Milk tube connector
is blocked by milk residues
Refer to section “Daily Cleaning
of the appliance” ,follow
“cleaning the milk container
and connection milk tube”,
Clean the connector and
make sure all the hole on the
connector is clean, use needle
or bristle of brush to clean the
hole.
The hole of Milk tube connector
is blocked by milk residues
which hardly to be cleaned
The milk tube connector not be
cleaned for a long time
Soaking the connection milk
tube into warm water for an
hour, follow the “cleaning the
milk container and connection
milk tube” in section “Daily
Cleaning of the appliance”,
keep using frothing milk
function to clean until
water come from dispenser
smoothly. Use needle or bristle
of brush to clean the hole
The milk froth is of poor quality The type of milk used is not
suitable for frothing
Different types of milk result in
different amounts of froth and
different forth qualities. Semi-
skimmed or full-fat cow’s milk
gives good results.
The temperature of the milk is
too high
No milk foam out from the
machine
Milk spray out the table Milk dispensing tube is not put
in place
Milk foam spray out from
dispenser
Descaling indicator keep
flashing even after the
descaling process
Decaling process is not
completed
Please be patient and wait
for the process finish. The
machine will auto shut off
automatically , don’t switch off
the machine manually
6
Troubleshooting