Cleaning the water tank
Remove the water tank, open the latches on both sides
and detach the top cover mechanism from the water
tank. Clean the water tank with warm clean water,
reinstall the top cover mechanism and fasten the
latches.
When installing the water tank, make sure that hooks
behind it fits securely into the hangers on the door.
Make sure that parts removed during cleaning (if any)
are installed correctly into their original locations.
Otherwise, water may leak.
Important:
Water tank and components of water dispenser are
not dishwasher-proof.
Remove the plastic drainer part as shown
in the diagram by pressing down on the
edge.
Water tray
Water that drips while using the water
dispenser accumulates in the drip tray. Remove
the drip tray by pulling it towards yourself and
empty it from time to time.
Safety lock for Water Dispenser
You may use the lock in order to avoid small children
tampering with the water dispenser. To do this, slide
the locking latch from left to right as illustrated in the
figure. You must slide the latch back to left position in
order to use the water dispenser.
To avoid accidental water dispensing, we recommend
you to lock the water dispenser.
Remove the water valve from the water tank
as shown in the diagram. When re-fitting,
make sure the O-shaped seal is in place.
8
9
UNLOCK
LOCK
