24 / 88 EN
Mobile room air conditioner / Installation Manual
5. button — Press this button, you can select the running mode as follows:
auto
cool
dry
fan
heat
The mode indicator light illuminates under the different mode.
C
Note:
Heat mode is not available for cool only units.
6. button — Press this button to enter sleep mode, which the unit will exit after 8 hours of
continuous operation and restore to the previous status.
C
Note:
The Sleep function can not be activated in fan and dry mode.
7. button
a. Press the “ “ button, the timer indicator light illuminates.
b. Press or button to select the desired time.
c. After setting time 5 seconds without other operation, the timing function will be initiated
automatically. If you press the TIMER button, there are no operation within 5 seconds or setting
time is 0, the timing function will be cancelled automatically.
d. When the timing function is initiated, the unit displays the remaining time by press the “TIMER”
button once and cancel the timing function by press it again.
C
Note:
With the unit on, press this button to set off timer.
With the unit off, press this button to set on timer.
8. button— Press this button, the swing indicator light will illuminate.
3
Control panel
