EN
11
6
Maintenance and cleaning
Never use gasoline, benzene or similar substances for
cleaning purposes.
We recommend that you unplug the appliance before
cleaning.
Never use any sharp abrasive instrument, soap, household
cleaner, detergent and wax polish for cleaning.
Use lukewarm water to clean the cabinet of your
refrigerator and wipe it dry.
Use a damp cloth wrung out in a solution of one teaspoon
of bicarbonate of soda to one pint of water to clean the
interior and wipe it dry.
Make sure that no water enters the lamp housing and other
electrical items.
If your refrigerator is not going to be used for a long
period of time, unplug the power cable, remove all food,
clean it and leave the door ajar.
Check door seals regularly to ensure they are clean and
free from food particles.
Avoiding bad odours Materials that may cause
odour are not used in the production of our
refrigerators. However, due to inappropriate
food preserving conditions and not cleaning the
inner surface of the refrigerator as required can
bring forth the problem of odour. Pay attention
to following to avoid this problem:
• Keeping the refrigerator clean is important.
Food residuals, stains, etc. can cause odour.
Therefore, clean the refrigerator with carbonate
dissolved in water every 15 days. Never use
detergents or soap.
• Keep the food in closed containers.
Microorganisms spreading out from uncovered
containers can cause unpleasant odours.
• Never keep the food that have expired best
before dates and spoiled in the refrigerator
Protection of plastic surfaces
Do not put the liquid oils or oil-cooked meals
in your refrigerator in unsealed containers as they
damage the plastic surfaces of your refrigerator.
In case of spilling or smearing oil on the plastic
surfaces, clean and rinse the relevant part of
the surface at once with warm water.
To remove door racks, remove all the contents
and then simply push the door rack upwards from
the base.
Never use cleaning agents or water that contain
chlorine to clean the outer surfaces and chromium
coatedparts of the product. Chlorine causes corrosion
on such metal surfaces.
Do not use sharp, abrasive tools,soap, household
cleaning agents,detergents, kerosene, fuel oil,
varnish etc. to prevent removal and deformation
of the prints on the plastic part.
Use lukewarm water and a soft cloth for cleaning
and then wipe it dry.
