Beko BEPB 09C, Руководство пользователя

Страница: 22 / 116

22 / 116 EN
Mobile room air conditioner / User Manual
8 Troubleshooting
To save the cost of a service call, please try the suggestions below to see if you can solve your problem
without outside help.
Air condition will not operate
Causes Solutions
• The power switch is released.
• Power supply failure.
• The fuse is burnt.
• It doesn’t reach the setting time for starting
up.
• Switch on the power.
• Wait for the recovery of power supply.
• Replace the fuse.
• Wait or eliminate the original setting.
Unit doesn’t start when pressing On/Off button
Causes Solutions
• It is not four minutes after switch off.
• Room temperature is lower than the
setting temperature under cooling mode
or higher than setting temperature under
heating mode.
• Wait four minutes.
• Reset the setting temperature.
The wind bowing out, but the cooling effect is bad
Causes Solutions
• Mistakes in temperature setting. • Set a proper temperature, setting
temperature should be lower than ambient
temperature.
• The air filter is blocked by dust.
• The air inlet or outlet of machine is blocked.
• Turn the air conditioner on in very hot room.
• Clean the air filter.
• Remove the obstruction.
• Allow additional time to remove stored heat
from walls, ceiling, floor and furniture.
• Cooling capacity is insufficient. • Reconfirm the required cooling capacity
with your dealer.
• The doors or windows are open. • Close the doors and windows.