Beko BEKOMAT 32U Vario, Инструкция по установке и эксплуатации

Страница: 5 / 15

Safety instructions
Service-Unit BEKOMAT® 32U Vario / 32U Vario F 5
Danger!
Supply voltage!
There is the risk of an electric shock involving injury or death when coming into contact
with non-insulated components carrying supply voltage.
Pos : 11 /Beko T ec hnis che D okumentati on/Sic her hei t/Maßnahmen N etzs pannung BM 31U/32U/33U @ 7\mod_1390467197804_15098.doc x @ 38070 @ @ 1
Measures:
• During electric installations, all regulations in force need to be adhered to (e.g. VDE 0100 / IEC 60364).
• When the control unit is open, service and installation works must only be undertaken when the
system is deactivated.
• The removed control unit has no IP degree of protection.
• All types of electrical works must be carried out by authorized and qualified personnel only.
Pos : 12 /Beko T ec hnis che D okumentati on/Sic her hei t/Sic herheits hinweis e, weitere BM ( nicht Ex, nic ht IF) @ 0\mod_1183616103770_15098.doc x @ 15100 @ @ 1
Further safety instructions:
• For installation and operation, the national regulations and safety codes in force must also be adhered
to.
• Do not use the BEKOMAT
®
32U Vario in hazardous areas.
• Regarding the inlet screw joints, excessive tightening forces must be avoided. This applies in particular
to conical screw joints.
• The BEKOMAT ® 32U Vario will only function when voltage is applied.
• Do not use the test button for permanent drainage.
• Use genuine spare parts only. This is imperative to ensure perfect functioning.
Pos : 13 /Beko T ec hnis che D okumentati on/Sic her hei t/Z usatz Sicherheits hi nweis e BM31/32 SA + 31U /32U SA @ 0\mod_1185351496993_15098.doc x @ 15150 @ @ 1
Additional advice:
• The removed control unit has no IP degree of protection .
• During installation, use spanner flat at the feed pipe (wrench size SW27) as a back rest.
• The service unit must not be dismantled.
Pos : 14 /Beko T ec hnis che D okumentati on/Sic her hei t/Vorsic ht F ehlfunktion @ 0\mod_1214378096290_15098.doc x @ 15237 @ @ 1
Caution!
Malfunction during operation!
Through incorrect installation and poor maintenance, malfunction may occur at the
BEKOMAT.
Condensate which is not discharged may cause damage to plants and in production
processes.
Pos : 15 /Beko T ec hnis che D okumentati on/Sic her hei t/Maßnahmen F ehl funkti onen BM @ 0\mod_1214378434025_15098.doc x @ 15238 @ @ 1
r
Measures:
• Condensate drainage which is reliable in performance directly optimizes the compressed-air quality.
• To prevent damage and breakdowns, it is imperative to observe the following:
•
Exact compliance with the specifications of use and with the performance parameters of the
BEKOMAT, in connection with the case of application (see "Proper use" section)
• Exact compliance with the installation- and operation instructions in this manual
• Regular maintenance and control of the BEKOMAT in accordance with the instructions in this
operating manual
Pos : 16 /---- Seitenumbr uch ---- @ 0\mod_1157028099015_0.doc x @ 15320 @ @ 1