Beko BEKOMAT 12 Скачать руководство пользователя страница 6

Страница: 6 / 64

2.2 Responsibility of the operating company

The responsible operating company must ensure the following to prevent accidents, incidents and adverse effects on the

environment:
• Before all actions, check to ensure that the manual available does in fact belong to the product.

• The product and the accessories are used, serviced and repaired in accordance with the intended use.

• All applicable statutory requirements, safety regulations and accident prevention regulations are being adhered to.

• All regulations and operating guidelines for safe working and information regarding behaviour in the event of

accidents and fires are accessible at the operating location at all are times.

• The product and accessories are only used with the recommended and fully operable safety equipment.

•

All assembly, installation and maintenance work is carried out by qualified skilled technical personnel only.

• Personnel have the necessary personal protective equipment available and also use this equipment.

• Suitable technical safety measures are taken so that the permissible operating parameters are not exceeded or

undershot.

BEKOMAT

12, 12 CO, 12 CO PN63

Original installation and operation manual

6 | 64

Содержание BEKOMAT 12

































































Результаты поиска

Содержание BEKOMAT 12

Отзывы:

Beko BEKOMAT 12, Оригинальное руководство по установке и эксплуатации, Страница: 6 / 64

Результаты поиска

Содержание BEKOMAT 12

Отзывы: