Beko BDIN16431 страница 35 Скачать руководство пользователя

Страница: 35 / 50

35/EN

Salt Indicator ( )

Please check the salt indicator on the

display to see whether there is adequate

amount of softening salt in the dishwasher

or not. You need to refill the salt reservoir

with salt whenever salt indicator appears

on the display of your machine.

Adjusting the water hardness level is

explained in Water Softening System

section.

Rinse Aid Indicator ( )

Please check the rinse aid indicator on the

display to see whether there is adequate

amount of rinse aid in the dishwasher or

not. You need to refill the rinse aid reservoir

with rinse aid whenever rinse aid indicator

appears on the display of your machine.

Adjusting the amount of rinse

aid

1. After turning on your machine, press

and hold the Time Delay and Start /

Pause / Cancel keys respectively.

2. Using the Time Delay key, turn on the 6

LED.

3. You can use the function keys to adjust

the rinse aid level.

If the 1st programme indicator is on, no

rinse aid will be dispensed

If the 2nd programme indicator is on, 1

dose of rinse aid will be dispensed.

If the 3rd programme indicator is on, 2

doses of rinse aid will be dispensed.

If the 4th programme indicator is on, 3

doses of rinse aid will be dispensed.

If the 1st, 2nd, 3rd and 4th programme

indicators are on, 4 doses of rinse aid will

be dispensed.

4. Press the On/Off key to exit the

settings menu. Your setting will be

saved automatically.

End of programme

When the programme you have

selected comes to an end, an audible

warning signal will warn you to turn off

your machine. This audible signal will

warn you with certain intervals before it

turns off.

Start / Pause indicator will go off once the

washing programme has ended.

1. Open the door of the machine.
2. Press the On/Off key to switch off your

machine.

3. Close the tap.
4. Unplug the machine from the socket.

For energy saving, the machine is

automatically switched off following the

completion of the programme or when

the programme is not started.

Leave your dishes in the machine

for about 15 minutes after they are

washed in order to have them cooled.

Your dishes will dry in a shorter time

if you leave the door of your machine

ajar during this period. This process

will increase the drying effectiveness of

your machine.

Water Cut-off Warning

If mains water is cut off or water inlet tap

is turned off, the machine will not take

water in and water off indicator will flash.

As long as the problem continues, washing

programme is paused and the water inlet

is checked regularly by the machine; when

the water is restored water off indicator will

disappear after a while and the washing

programme resumes.

Содержание BDIN16431



















































Результаты поиска

Содержание BDIN16431

Отзывы:

Похожие инструкции для BDIN16431

Бренды по названию

Популярные бренды

Beko BDIN16431, Руководство пользователя

Результаты поиска

Содержание BDIN16431

Отзывы:

Похожие инструкции для BDIN16431

Бренды по названию

Популярные бренды