Beko B7S-B7SLED, Руководство по обслуживанию, Страница: 42 / 100

B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
42
If the filter cap is one piece, pull the cap from both sides at the top to open.
Figure 7.5 Cleaning the filter - 2
You can remove the filter cover by slightly pushing downwards with a thin plastic
tipped tool, through the gap above the filter cover. In order to remove the cover, do
not use metal ended tools.
3. While some of our products are equipped with an emergency water drain hose, some are
not. Follow the below procedures in order to drain water.
If the product has an emergency water draining hose, in order to drain the water:
a. Pull away the emergency water draining hose from its housing.
Figure 7.6 Cleaning the filter - 3
b. Put the larger end of the hose into a large vessel. Pull and remove the plug at the end of
the hose and drain the water into a vessel. When the vessel is full, shut the nozzle of the
hose by inserting the plug into it. After you empty the vessel, repeat above procedures
and drain the water inside the machine fully.
c. When the water drainage is complete, block its nozzle again with the plug and secure the
hose into its place.
d. Turn and remove the pump filter.