Beko B32L 5745 4B, Руководство пользователя

Страница: 175 / 269

84 / 89 TR
Television / User Manual
GLOSSARY
--------------------------------------------------------------------------------------------------------------
Depending on the television model.
ARC
The ARC (Audio Return Channel) can be used
to play back the audio signal from the television
channel using an HDMI cable or an optical
cable with a multi-channel amplifier.
Backlight
Manual setting for back lighting (only active if
dynamic back lighting is switched to “OFF”).
This setting also directly impacts power
consumption.
Block Noise Reduction
This function can only be selected with digital
reception sources and AV presets. It reduces any
interference from artefacts (pixel blocks) from
digital programmes due to MPEG compression
(such as from DVB-T receivers and lower
transmission rates or DVD players).
Boot loader version
Boot loader is a software application that
is loaded by the device firmware from a
bootcapable medium and then executed. The
boot loader then loads further parts of the
operating
system.
Common Interface
Interface for a DVB receiver. Encrypted channels
can only be viewed with a CA module suitable
for the encryption system and in conjunction
with the corresponding smart card.
Digilink
This function uses the CEC (Consumer
Electronics Control) protocol.
CEC allows external devices connected to the
HDMI sockets with an HDMI cable (e.g. DVD
player) to be operated with a remote control.
DiSEqC
DiSEqC (Digital Satellite Equipment Control) is
a digital system for controlling complex satellite
systems with a motor or several LNBs.
DiSEqC is necessary if two or more satellite
positions need to be controlled.
DVB-C
DVB-C (Digital Video Broadcasting – Cable)
and the successor DVB-C2 standard are
variations of DVB which is used for transmitting
digital radio and television signals via a cable
connection.
DVB-S
DVB-S (Digital Video Broadcasting – Satellite)
is the name given to broadcasting DVB signals
via satellite.
DVB-T
DVB-T (Digital Video Broadcasting – Terrestrial)
is a variation of DVB which is used for
transmitting digital radio and television signals
via a cable connection.
Dynamic Contrast
The function dynamically and optimally adjusts
the contrast for the respective picture content
by analysing images and then altering this
depending in a change in contrast. This increase
the contract, however may also reduce the
visible brightness levels in the picture.
Film mode
Detects and processes feature films
automatically for all channel sources. This
means you will always receive an optimal
picture.
This functions in the modi 480i, 576i and 1080i
in TV playback and for other channel sources.
If the »Film mode« is switched on for
programmes without a feature film signal, minor
problems such as picture freeze, defective
subtitles or fine lines in the picture could occur.
Firmware version
Firmware is the term used for software
that is embedded in a programmed chip
(microcontroller). It is mostly stored in a flash
memory, an EPROM or an EEPROM. The
firmware contains functions for controlling the
device.