Beko 7178682100 Скачать руководство пользователя

Страница: 34 / 44

34 / EN

Washing Machine / User Manual

Troubleshooting

Problem

Reason

Solution

Programme does not start

after closing the door.

Start / Pause / Cancel button was not pressed.

• *Press the Start / Pause / Cancel

button.

It may be difficult to close the loading door in case

of excessive loading.

• Reduce the amount of laundry and

make sure that the loading door is

closed properly.

Programme cannot be

started or selected.

Washing machine has switched to self protection

mode due to a supply problem (line voltage, water

pressure, etc.).

• To cancel the programme, turn

the Programme Selection knob to

select another programme. Previous

programme will be cancelled. (See

“Cancelling the programme”)

Water in the machine.

Some water might have remained in the product

due to the quality control processes in the

production.

• This is not a failure; water is not

harmful to the machine.

The machine enters standby

mode after the programme

starts or it does not take in

water.

Tap is turned off.

• Turn on the taps.

Water inlet hose is bent.

• Flatten the hose.

Water inlet filter is clogged.

• Clean the filter.

Loading door may be open.

• Close the door.

The water connection may be wrong or water may

be cut off (When the water is cut off, washing or

rinsing LEDs flash).

• Check the water connection. If the

water is cut off, press the Start/Pause

key after the water has been supplied

again to resume the operation from

standby mode.

Machine does not drain

water.

Water drain hose might be clogged or twisted.

• Clean or flatten the hose.

Pump filter is clogged.

• Clean the pump filter.

Machine vibrates or makes

noise.

Machine might be standing unbalanced.

• Adjust the feet to level the machine.

A hard substance might have entered into the

pump filter.

• Clean the pump filter.

Transportation safety bolts are not removed.

• Remove the transportation safety

bolts.

Laundry quantity in the machine might be too

little.

• Add more laundry to the machine.

Machine might be overloaded with laundry.

• Take out some of the laundry from

the machine or distribute the load by

hand to balance it homogenously in

the machine.

Machine might be leaning on a rigid item.

• Make sure that the machine is not

leaning on anything.

There is water leaking from

the bottom of the washing

machine.

Water drain hose might be clogged or twisted.

• Clean or flatten the hose.

Pump filter is clogged.

• Clean the pump filter.

Machine stopped shortly

after the programme

started.

Machine might have stopped temporarily due to

low voltage.

• It will resume running when the

voltage restores to the normal level.

Machine directly discharges

the water it takes in.

Draining hose might not be at adequate height.

• Connect the water draining hose as

described in the operation manual.

Содержание 7178682100













































Результаты поиска

Содержание 7178682100

Отзывы:

Похожие инструкции для 7178682100

Бренды по названию

Популярные бренды

Beko 7178682100, Руководство пользователя

Результаты поиска

Содержание 7178682100

Отзывы:

Похожие инструкции для 7178682100

Бренды по названию

Популярные бренды